|
MATRIX 2200 HF
TIG INVERTER WELDING EQUIPMENT
Powerful, compact and lightweight MATRIX 2200 HF is the most innovative,
high-performing and technologically ahead single phase power source
ever developed for TIG welding. Its PFC Power Factor Correction
device optimises the amount of energy consumption by allowing the
use of this powerful power source, without problems, with 16A fuse
mains and with power generator sets. The user-friendly and advanced
function digital control ensures an extraordinary perfect stability
of the welding parameters thus granting very high quality welding
both in TIG and MMA with any electrodes. MATRIX 2200 HF is the ideal
choice for all qualified welding applications and maintenance jobs,
whenever power and portability are needed.
MATRIX 2200 HF allows TIG DC welding of mild and stainless steel, copper and its
alloys.
|
FEATURES
- Built-in innovative PFC Power Factor Correction
- Digital control of all the welding parameters
- High duty cycle (40°C) 150 A @ 60% in MMA, 150 A @ 100% in TIG
- Low energy consumption (-30%)
- High reliability when used with generator sets
- Suitable to be used with mains cable lengths over 100 m
- Automatic compensation for mains voltage fluctuations within +/- 20%
- Excellent welding characteristics in TIG and MMA with any type of electrodes, cellulosic included
- High frequency arc striking, precise and efficient even from long distance
- Digital Ammeter and Voltmeter with welding current presetting and Hold Function of the last read value
- ENERGY SAVING function to operate the power source cooling fan and the torch water cooling only when necessary
- Standard equipped with slow and fast pulse mode (0.5 - 2000 Hz) with the possibility of activating “SYN PULSE” function
- Possibility of activating the VRD function
- Possibility of memorizing welding parameters (9 JOBS/programs)
- User-friendly and advanced function digital control
- Use of up/down TIG torches will enable to adjustl directly from the torch both welding parameters and memorized JOBS
- Auto-diagnostic feature for trouble shooting
- Control rack protection cover
- Innovative and compact design
- Metallic main structure with shock-proof fibre compound front panel
- Sloping front panel, easy to read and adjust and highly visible from any direction
- Reduced weight and size, easy-to-carry
- IP 23 protection class and dust-proof electronic components, thanks to the innovative “Tunnel” fan cooling system, allow operation in the toughest work environments
- Compact water cooling equipment integrable with the power source (optional)
|
|
|
ACCESSORIES
- VT 100 trolley for lodging gas cylinder and water cooling equipment
- HR 22 water cooling equipment
- PSR 6 foot remote control
- CD 6 remote control
- TIG torches
- Up/down TIG torches
- Carrying belt
|
 |
 |
 |
| Trolley |
HR 22 water cooling equipment |
Carrying belt |
|
| VRD Voltage Reduction Device |
|
VRD device reduces the open circuit voltage to values below 15 V, by enabling the use of the machine in highly hazardous environments for the operator’s maximum safety
|
|
| PFC - Power Factor Correction (Cos fi=1) |
|
The wave shape of the current drawn from the mains is made sinusoidal by the PFC device with a consequent total lack of harmonic disturbances in the mains and consumption optimization, which enables to utilize the power source at full range on a 16 A fuse. The PFC circuit gives the machine a wider protection against mains voltage fluctuations, by also making it safer whenever being operated by power generator sets
|
|
