PLASMA CUTTING EQUIPMENT

Plasma Cut 26i Compressor

Plasma Cut 26i Compressor

Plasma Cut 26i Compressor

Plasma Cut 26i Compressor

PLASMA CUT 26i COMPRESSOR

PLASMA CUT 26i compressor, a single phase IGBT based inverter power source with built-in professional compressor, ensures an extraordinary high quality cutting of any metal and perforated lamination sheet. Its lightness and incorporated compressor allow its portability and make it absolutely necessary for any maintenance work whenever lacking an air compressor source. Powerful, compact and light, PLASMA CUT 26i compressor is the ideal solution for installers, blacksmiths, car body repair, plumbing and building industry.

Digital electronic control to ensure an excellent cutting
Torch with pilot arc
Over-undervoltage protection
Innovative and user friendly design
Control panel protected against accidental impacts

Documentazione
(File Adobe Acrobat® .pdf)
Dati Tecnici

PLASMA CUT 46i - 61i - 100i

These powerful power sources, built according to the very latest IGBT based inverter technology, represent the most efficient solution for the manual cutting of any metal and perforated lamination sheet. Thanks to the electronic control and inverter precision and flexibility, in any circumstance it is possible to determine the most correct parameters to obtain high quality cutting depending on material and thickness. 
Single phase PLASMA CUT 46i and three phase PLASMA CUT 61i and 100i, handy, powerful and light, are suitable to be used in car body repairs, fabrication works, industry and maintenance.

Arc parameter electronic control for an excellent cutting quality
 Energy Saving function to switch off the power source cooling fan when no longer necessary
 Cutting parameters stability within +/- 10% mains voltage fluctuations
Long lasting consumable parts
 Innovative and user friendly design
 Robust handle integrated into the chassis
 IP 23 protection class and dust-proof electronic components, thanks to the innovative ”Tunnel” fan cooling system, allow their use in the toughest work environment
 Electrode wearing and improper operation signalling
 Possibility of cutting grids and perforated lamination sheets
 Contact cutting possibility without sliding blocks or other spacers
 Central connector for the torch (Plasma Cut 100)
 Regulator group with built-in filter and air impurity automatic expulsion

Product Literature
(File Adobe Acrobat® .pdf)
Technical Data


Plasma Plus 56 - 91

These three-phase equipment, with their new and user-friendly design, provide an economic, simple and efficient cutting system for any metal cutting application. Fitted with a dual current range, they are most suitable for car body repairs, small and medium fabrication work and industry.

Innovative design with sloping shock-proof fibre compound front control panel 
Dual cutting current range
Filter and regulator group with automatic air impurity expulsion
Robust ergonomic handle for easy manoeuvrability by wheels
 Electrode wearing and improper operation signalling 
 Contact cutting possibility on low range without sliding blocks or other spacers
 Central connector for the torch (PLASMA PLUS 91)
 

Product Literature
(File Adobe Acrobat® .pdf)
Technical Data


Plasma Plus 150 E

This powerful three-phase equipment, based on the latest evolution of the consolidated Thyristor technology, grants reliability and safety in any work condition. The innovating cutting current control system Total Wave Control TWC and the electronic adjustment allow to select the very best parameters in any application, granting superior cutting quality on any thickness and material . Plasma Plus 150 E enables the utilisation of different amperage torches, air or water cooled, by also automatically recognizing the used torch and changing the range of cutting currents for each fitted torch. The control panel helps the operator by automatically indicating the correct tip diameter to be used depending on both used torch and preselected cutting current.

Product Literature
(File Adobe Acrobat® .pdf)
  Digital panel for preselection and reading of the cutting current
Continuous cutting current adjustment
Possibility of using different amperage torches
Identification of the used torch and automatic cutting current range change from 25A - 75A to 25A
    - 150A
Cutting parameters stability within ± 10% mains voltage fluctuations
Filter and regulator group with air impurity automatic expulsion
Contact cutting possibility with currents below 50A without sliding blocks or other spacers
Possibility of use on an automatic cutting equipment
Automatic fan motor switching off 9 minutes after cutting operation is over, to reduce airborne
    contaminants drawn into the equipment
Technical Data

Torch compass
A.C. AND D.C. INDEX D.C.
ELECTRONIC ADJUSTMENT