MULTIFUNCTION POWER SOURCES DUAL-PULSED MIG, PULSED MIG, MIG/MAG, MMA and TIG

Product Literature
(File Adobe Acrobat® .pdf)

DIGITECH 300 Compact
DIGITECH 320
DIGITECH 400
DIGITECH 500

The synergic multifunction DIGITECH power sources, based on the most modern IGBT inverter technology and fully digital controlled, allow premium welding quality in both MIG-MAG and in Pulsed and Dual-Pulsed MIG on all materials and particularly on stainless steel, aluminium and galvanized steel, by minimizing any reworking job thanks to their spatter free welding.
Technologically advanced, easy-to-use, DIGITECH's represent the ideal solution for any application requiring high precision and repeatability of the achieved results.
The DIGITECH's versatility allows the operator achieve optimal performances both in TIG by "lift" mode striking and in MMA welding. DIGITECH 320, 400 and 500 models are supplied with separate wire feeder, whilst DIGITECH 300 Compact is designed with built-in wire feeder.

FEATURES

 Synergic digital control of all the welding parameters.
 Spatter free exceptional welding characteristics in both MIG/MAG and PULSED MIG on any
    material and with any gas
 High welding performance in both MMA and TIG by "Lift" mode striking
 Ability to store personalized welding programs
 "Energy Saving" function to operate the power source cooling fan and the torch water cooling only
    when necessary.
 Monitoring and repeatability of the welding parameters, which can be printed
 User friendly and easy-to-use selection and recalling of the parameters and welding programs
 Low energy consumption
 Remote parameter adjustment directly from TA 4 feeder
 Auto-diagnostic feature for trouble shooting
 Initial and crater welding cycle control
 The use of special MIG torches permits the remote control of the welding parameters
    directly from the torch
 Innovative and user friendly design
 Metallic main structure with shock-proof plastic front frames
 Control panel protected against accidental impact
 Robust handles built into the chassis
 Sloping front control panel, easy to read and adjust and highly visible from any direction

TRAINO

Cast aluminium wire feeder with 4 large size rolls for precise and constant wire feeding
Welding current SYNERGIC adjustment
Arc length FINE adjustment
Use of Push-Pull guns optional

Short-Pulse  Click!
Dual-Pulse  Click!
Digital Control  Click!
WFC - Wave Form Control  Click!
WSC - Wire Start Control  Click!
Torce UP / DOWN  Click!
Vision.Arc

VISION.ARC is the innovative, welding arc performed by the Digitech's in MIG-MAG. VISION.ARC is the result of CEA 60 years experience in welding technology concentrated in a digital control of the arc dynamic which grants something completely different from the traditional way the welders are used to: the welding arc is totally under control: it’s like a vision, definitely a new welding vision. VISION.ARC is constantly monitored by a latest generation powerful microprocessor controlling in real time the welding process. All parameters are quickly elaborated and adjusted, in a very few microseconds, by the control which digitally handles the short-circuits, typically occurring in MIG/MAG welding, by constantly keeping VISION.ARC extremely precise and stable, while also compensating for any changes in welding conditions caused by the torch movement and work-piece irregularity. VISION.ARC, very “sensitive" and easy to be used by a welder, grants premium performances with an exceptionally high quality bead impossible to be obtained by traditional power sources, thus resulting into much faster welding speed, higher welding wire deposition rate and remarkable reduction not only in wire waste and spatters, but also in workpiece thermal dilatations.
Technical Data
Control Panel

ACCESSORIES

Gas cylinder and water cooling trolley. - Gas pressure reducers - Mig torches - Adjustable torch support - RC 22 remote control - UltraLUX welding masks
 

Wheels kit for TA4

HR 26 water cooling equipment

 

INDEX