Set of standard jaws
Set of standard jaws (also for annealing)
Resistance welding
N20
BUTT WELDERS
SPECIALLY DESIGNED FOR REINFORCED CONCRETE RODS
BUTT WELDERS FOR CONCRETE REBAR
N20 is a manually operated buttwelder especially developed for joining concrete reinforcing steel rods. Working height adjustable on two levels, pedals accessible from the rear of the machine, powerful upsetting force: this equipment has been developed carefully considering all daily needs of the typical user. N20 is standard equipped with annealing facility and four wheels for easy transportability.
- Easy-to-use
- High reliability
- Movable jaw by bearings for very precise low friction sliding to achieve quality welding
Special options
Upon request N20 series can be supplied with a burr-removing grinding wheel.
Other characteristics
- Manually operated
- Welding upset adjustment
- Welding power adjustment
- Movable jaw by bearing guides
- Graduated scale to easily adjust jaws opening
Available accessories
Discover all available accessories
Datasheet
N20: Technical features
| TECHNICAL DATA | N 20 | |
| Single phase input 50/60 Hz | V | 400 |
| Rated power at 50% | kVA | 20 |
| Max. welding power | kVA | 88 |
| Installed power | kVA | 15 |
| Delayed fuse | A | 63 |
| Secondary voltage | V | 4,4 |
| Secondary short circuit current | kA | 25 |
| Clamping force | daN | 400 |
| Upsetting force | daN | 250 |
| Dimensions (LxWxH) | mm | 800 x 880 x 1650 |
| Weight | kg | 320 |
You may also like
N12
DESIGNED FOR WIRE DRAWING MILLS
N22
DESIGNED FOR WIRE DRAWING MILLS
SQ/A
FOR MASS PRODUCTION
Configurator
Configure N20 for your needs
Select product
Select product
Electrodes
