Three phase MIG-MAG semi-automatic equipment most suitable for any industrial application, such as medium and large fabrication work, shipyard and steel construction. Echo series , thanks to its modularity, provides the maximum versatility in any welding application. ECHO 452 - 552 - 652 power sources, usable with a wide selection of wire feeders and different length interconnecting cables, can also have the remote control facility of all welding parameters on the feeder. ECHO 452 and 552, if fitted with a digital feeder based on the MICRO 2000 microprocessor, become a real synergic equipment.

Technical data

The ECHO range is now completed by ECHO 600 CC/CV Multiprocess, which, depending on what needed, will enable MIG/MAG, MMA and Lift TIG welding and GOUGING with carbon electrodes. The excellent performance in any application, whatever process is required, makes this "flexible multiprocess unit" particularly recommended for medium and heavy duty fabrication work, shipbuilding and construction industries and anywhere there is the need of both MMA and flux cored wire welding.

New attractive design with protective frame against accidental hits and
    robust ergonomic handle for easy handling
Two inductance positions for best welding pool in any situation.
Thermostatic protection led

External cabinet for a quick mains voltage changeover.
Standard equipped with cylinder holder undercarriage fitted with large wheels
    for easy manoeuvrability.
P.C.B. in an isolated rack for protection against dust and dirt.
MIG/MAG, MMA . TIG and GOUGING selector
Power source or remote voltage control (from feeder) switch
High efficiency and low noise fan motor
Automatic "Hot start" for best striking in any condition.
Overcurrent protection

MIG/MAG functions
Voltage electronic adjustment.
Possibility of being connected to MP 4 feeder with interconnecting cables up to 50
    meters (and over) and remote voltage control on the feeder as well.
Two inductance positions for best welding pool in any situation.
Automatic "Hot start" for best striking in any condition.

MMA-TIG.GOUGING functions
Arc Force control adjustable by potentiometer to select the welding arc best
    dynamic characteristic.
Hot start adjustable by potentiometer to improve arc striking with difficult electrodes.
Antisticking function to avoid electrode sticking onto workpiece
Suitable for welding with any electrode
Possibility of TIG welding with Lift striking
Possibility of Gouging with carbon electrodes

The ECHO 600 CC/CV power source is supplied with a dedicated 4 roll MP 4 feeder, which enables to adjust both wire speed and welding voltage directly from its control panel. The MP 4 feeder has a welding process selector, EURO connection and dinse connection for MMA, TIG and GOUGING. Burn back and motor ramp are externally adjustable.

Technical data

HOME