D.C. - ELECTRONIC ADJUSTMENT

Product Literature
(File Adobe Acrobat® .pdf)

RAINBOW 1150 - 150
153 cell - 180

RAINBOWS represent the latest evolution in inverter technology DC welding equipment. These powerful 100 kHz power sources are based on latest generation IGBT’s and fitted with a flat transformer.
RAINBOWS, with their lightness, reduced size and their excellent characteristics in electrode (MMA) and TIG welding with "lift" mode arc striking, are the most suitable solution for maintenance and light fabrication works.
RAINBOW 153 cell is a special version for cellulosic electrodes.

Reduced weight and size, easy-to-carry
 Innovative and compact design
Shock-proof fibre compound main structure
Control panel protected against accidental impact
Robust handle built-in into the chassis
 Excellent welding characteristics with any type of
    electrode
 Low energy consumption and high electrical
    efficiency
 Suitable to be used with 100 m length mains cable
    without power loss
 Possibility to work with power generator sets of    
    adequate size thanks to over-under voltage
    protection against fluctuations
Automatic compensation for mains voltage
    fluctuations within + 15% – 20%
3 available welding processes: MMA - CrNi - TIG
Built-in Arc Force to automatically select the best
    welding arc dynamic characteristic
Automatic Hot Start to improve the arc striking
    with the most difficult electrodes       
Electrode Antisticking function

Technical Data
Control Panel

ACCESSORIES

Carrying belt

Carrying belt
RTA TIG torches
 UltraLUX welding masks
 RAINBOW Bag
 Accessory kit
HR25.jpg (2631 byte)

RAINBOW Bag and accessories kit

Product Literature
(File Adobe Acrobat® .pdf)

SPECIAL VERSION:

MATRIX 250E with Digital ammeter with welding current presetting and hold function of the last welding parameter

MATRIX 250 E - 400 E

Built according to the very latest IGBT based inverter technology, these DC power sources thanks to their excellent arc characteristics, are recommended for highest standard applications with any electrode. Suitable to be used in shipyards, steel construction, pipe welding and maintenance, MATRIX E ’s ensure an extraordinary stability of the welding parameters and their "fast dynamic characteristic" achieve to obtain quality results even with the most difficult cellulosic and basic electrodes.
MATRIX 250 E and 400 E also allow the possibility of TIG welding with "lift" mode arc striking.

Reduced weight and size, easy-to-carry.
 Innovative and compact design
 Metallic main structure with shock-proof fibre compound front panel
Control panel protected against accidental impact
Robust handle integrated into the chassis
Excellent welding characteristics with any type of electrode, including cellulosic
Possibility of professional TIG welding by "lift" striking
Low energy consumption
Automatic compensation for mains voltage fluctuations within +15% - 20%
 3 available welding processes: MMA - CrNi - TIG
Adjustable Arc force
 Automatic Hot Start to improve the arc striking with the most difficult electrodes
Electrode Antisticking function

Technical Data
Control Panel

ACCESSORIES

Robust trolley for an easier transport

Trolley for power source
CD 6 remote control with cable from 8 to 50 m
RTA TIG torches
 Accessory kit
 UltraLUX welding masks
HR25.jpg (2631 byte)

CD 6 remote control with cable
from 8 to 50 m



Arctronic 426 - 626

DC three-phase electrode welding equipment with electronic current adjstment. Sturdy, reliable, with excellent arc characteristics and recommended for highest standard applications with any electrode, they are suitable to be used in shipyards, steel construction and pipe welding. ARCTRONIC's ensure an extraordinary stability of the welding parameters and their "fast dynamic characteristic" allows to obtain quality results also with the most difficult cellulosic and basic electrodes.

 
Adjustable Arc Force for choosing the best welding arc dynamic characteristic.
Adjustable Hot Start to improve the arc striking with difficult electrodes.
Electrode Antisticking function.
Automatic compensation for mains voltage fluctuations within ± 10%.
Suitable for welding with any kind of electrode.
Lift arc TIG welding striking.
Gouging facility with carbon electrodes.
Low noise highly efficient fan motor.
"Stand-by" function switching off the power source also from distance when not in use.
Overcurrent protection.
P.C.B. in an isolated rack for protection against dust and dirt.
Electronic Welding Current Adjustment through easy- to-set calibrated output knob.
MMA -TIG - Gouging Process switch.
OCV selector switch (42V-75V). The lower voltage permits to obtain the "drop by drop" deposit with
    cellulosic electrode in pipe welding.
Digital A/V with hold function of last welding parameters (optional).
48V socket for auxiliary services up to 1500W (optional).
CD3 Remote Control with cable from 8 up to 50 m (optional)

Product Literature
(File Adobe Acrobat® .pdf)

Technical Data



TIG torch
Manual remote control CD3
Digital Voltmeter/Ammeter
Ultralux
PLASMA CUTTING EQUIPMENT INDEX D.C.
SHUNT ADJUSTMENT

homesmall.gif (3322 byte)

HOME

©2001 C.E.A. S.p.A.