DIGITECH VP2 COMPACT

ARC WELDING

SYNERGIC MULTIPROCESS INVERTER PULSED COMPACT POWER SOURCE

Synergic multiprocess pulsed equipment of DIGITECH VP2 (VISION PULSE 2) series are the evolution of DIGITECH VISION PULSE.
The use of a very latest generation microprocessor and of a new arc control software vision.ARC2 allow to obtain an incredibly far superior premium quality welding performance unthinkable till this day.
DIGITECH VP2 equipment are characterized by a synergic digital control to automatically determine the best welding parameters, based on the used type of material, wire diameter and gas.
DIGITECH VP2 innovative digital control with colour display fully meets the needs of combining synergy with the total control of all the welding parameters, for a far more modern and effective approach to welding.
Technologically ahead, robust and easy-to-use, they offer premium welding quality at high speed, in PULSED MIG, DUAL PULSED, MIG-MAG, MMA and TIG with “lift” arc striking and represent the best solution in any industrial field requiring high precision and repeatability of the achieved results.
DIGITECH 3200 VP2 is designed with a built-in feeder.



vision.ARC2 is the latest evolution of the software for the arc control, developed by CEA to achieve a more perfect and stable arc, together with a superior correction in the control of the welding pulse impulse. New vision.ARC2 allows the power source control to operate in a very precise and faster way, thus granting an absolute constant arc and a perfect detachment of the droplet, mostly in MIG PULSED and DUAL PULSED

vision.PULSE permits a short arc pulse welding, constantly controlled, by optimizing the results of traditional pulse welding. This enables to reduce the high heat input, typical in pulse welding, with a consequent reduction in distortions, an improvement in the puddle and considerable increase in welding speed too.

DUAL PULSE favours a further reduction in the heat transfer to the workpiece by minimizing its deformation and produces premium quality aesthetic beads similar to TIG finishing.
Dual Pulse is extremely useful mostly when welding aluminium and stainless steel.

SPECIAL PROCESSES (OPTIONAL)
vision.ARC2 , available on DIGITECH VP2, is the software platform which enables to weld by means of the following special processes, i.e.:

 

 

SIMPLE AUTOMATION
Standard equipped with analogic-digital I/O, DIGITECH VP2 can be easily integrated into automated welding equipment without any expensive and sophisticated external interfaces usually necessarily supplied for robotics.

ROBOT INTERFACE
DIGITECH VP2 power sources can be easily connected to any Robot by means of a CEA Robot Interface which can handle several analogic, fieldbus digital protocols depending on the features of the Robot to be used.

OPEN TO THE FUTURE
DIGITECH VP2 equipment are systems open to evolving technology: both control firmware and software are designed to be always updatable.

ETHERNET LAN
Upon request, DIGITECH VP2 equipment can be supplied fitted with an Ethernet socket for connection to any network.

Saldatura MIGSaldatura MIG ad arco pulsatoSaldatura elettrodo rivestitoSaldatura TIGControllo digitaleRegolazione sinergicaProgrammabileCompensazione tensione di rete ±20%Strumenti misura A/VInnesco Lift ArcPredisposizione comando a distanza

CT 70 trolley

CT 75 trolley

RC 178 remote control

Autotransformer

Up/Down torches

HR 30/31 water cooling equipment

DATI TECNICI   DIGITECH 3200 VISION
PULSE
Three phase input 50/60 Hz V 400
Input Power @ I2 max kVA 19
Delayed Fuse (I eff) A 20
Power Factor / cos φ   0,62/0,99
Efficiency Degree   0,82
Open circuit voltage V 62
Current range A 10-320
Duty cycle at (40°C)   100% 240
60% 270
40% 320
Wires mm 0.6-1,6
Standards   EN 60974-1 • EN 60974-10
Protection Class IP 23 S
Insulation Class   H
Dimensions  mm  660
 mm 290
 mm 515
Weight kg 41

Additional information

Settore

, , , , , , , ,

Processo

, , , ,

Alimentazione

Materiale

, , , ,

Processi Speciali

, , , , , , ,

Caratteristiche speciali

, , , , ,

You may also like…