Search for a product within the site

Find your best solution for Arc welding

Input power

Special Features

Materials

Special Processes

Processes

Application fields

Find your best solution for Plasma cutting

Input power

Special Features

Materials

Processes

Application fields

Recommended thicknesses

Severance thicknesses

Contact us

To receive more information about CEA products please fill out the form

"*" indicates required fields

First name*

Last name*

Company name*

Job title

Email*

Phone number

City*

Country*

General area of interest*

Note*

Other data

CEA Welding is committed to protecting and respecting users’ privacy: the personal information collected is only used to administer the accounts and provide the requested products and services. Users may be contacts with suggestions on products, services or other content that we believe could be interesting for them. If you want to be contacted for this purpose, select one of the following contact modes:

I agree to receive further communication from CEA Welding.

Privacy*

In order to give you the requested content, we need to store and use your personal data. If you allow us to do this, please select the checkbox below.

I allow CEA Welding to store and process my personal data. *

CAPTCHA

You can unsubscribe at any moment. For further information about the execution of this procedure, consult our privacy policy and other recommendation regarding the protection and respect of privacy; read our Privacy policy.

MATRIX HF-R

Arc welding

MATRIX HF-R

THE PERFECT ROBOTIC SOLUTION FOR DC TIG

TIG INVERTER WELDING EQUIPMENT FOR ROBOTIC APPLICATION

MATRIX series three-phase power sources, in the special “R” version, can be easily integrated in TIG welding automated equipment by means of ROBOMAT 1 interface which handles both all the start/stop signals of the process and main welding parameter adjustments.

MATRIX HF-R

Robomat 01

ROBOMAT01 represents a flexible and efficient interface system that fully meets all Analogic/Digital connections.

Other characteristics

TIG DC min current from 1A
Standard equipped with pulse mode integrated into the control with available “EASY PULSE” feature
Excellent TIG welding characteristics
HF IGNITION – Intelligent HF ignition grants a more accurate and prompter arc striking in all conditions.
“Energy Saving” function to operate the power source cooling fan and the torch water cooling only when necessary

MATRIX HF-R FEATURES:

CONTROL DISPLAY HF

Welding process selector: TIG DC, TIG DC “Lift”, MMA DC
Pulse TIG welding adjustable from 0,5 up to 2000 Hz with available “EASY PULSE” features
Pulsation mode: Synergic, Fast, Ultrafast, Slow
99 program

SIMPLE AUTOMATION

CEA power sources are standard equipped with analogic-digital I/O. This allows to integrate very easily the power source into an automated welding equipment without any expensive and sophisticated external interfaces, usually necessarily supplied for robotics.

coldTACK

Innovative spot welding device to achieve precise and safe joining with a minimal thermal input.

Multi-cold.TACK function grants cold spotting in a rapid sequence, thus further widening the benefits of the single spot.

Thanks to Perfect-Point function, cold.TACK allows to obtain the most precise spot positioning.

TIG RCT - Running coldTACK

RCT is the acronyms of Running cold.TACK; indeed, the TIG RCT process allows to benefit of all the cold.TACK advantages, by repeating the single cold.TACK point in a continuous way, in order to achieve a cold and perfect welding seam.

Using TIG RCT the welding seam is much colder in comparison to the one achievable with Pulse TIG and it represents the ideal solution to weld thin materials with a very low heat transfer. TIG RCT is a direct current process not available in AC welding.

PULSE MODE

SYN PULSE

SYN PULSE will synergically generate pulse frequency and base current

ULTRA FAST

Adjust frequency up to 2000 Hz

FAST PULSE

Adjust frequency from 0,5 Hz to 500 Hz

SLOW PULSE

Adjust separately current/time of peak and base

CYCLE FUNCTION

“CYCLE” function allows to continuously switch between two current values, by previously preselected simply pressing the torch trigger. This function is most suitable for welding different thickness profiles, requiring a continuous current adjustment change.

Available accessories

Discover all available accessories

Configurator

HR 23

Water cooling equipment HR 23 400 V

HR 32

Water cooling equipment HR 32 400 V

Cea CL-1100

Cea CL-1100 cooling liquid – 5 l Tank

Trolley VT 101

Trolley VT 101 with 2 rolls for power source, cooling equipment and cylinder

Trolley CT 401

Trolley CT 401 with 4 rolls for power source, cooling equipment and cylinder

35 mm² / 4 m Ground cable with clamp

50 mm² / 4 m Ground cable with clamp

A6 kit

A6 Connection kit for non-standard Torch

Gallery

MATRIX HF-R at work

Datasheet

MATRIX HF-R: Technical features

TECHNICAL DATA			MATRIX 3000 HF-R		MATRIX 4200 HF-R
			TIG	MMA	TIG	MMA
Three phase input 50/60 Hz	V	+20% -20%	400		400
Input power @ I₂max	kVA		8,5	8,5	16,8	19,2
Delayed Fuse (I₂ @ 100%)	A		10	10	16	16
Power factor / cos φ			0,96/0,99	0,95/0,99	0,95/0,99	0,95/0,99
Efficiency Degree			0,87		0,86
Open circuit voltage	V		85		85
Current range	A		1-300	10-270	3-420	5-400
Duty cycle at (40°C)	A 100%		210	200	270	270
	A 60%		250	230	340	340
	A X%		300 (35%)	270 (35%)	420 (40%)	400 (40%)
Standards			EN 60974-1 • EN 60974-3 • EN 60974-10

Protection Class	IP		23 S		23 S
Dimensions (LxWxH)	mm		495x185x390		560x220x425
Weight	kg		17,5		25