SHARK 155

With its stunning cutting force, SHARK 155 is the most powerful machine in the range. Robust and precise, it ensures extremely high quality cutting results also on very large thickness. Equipped with a display for the digital control of all the parameters, it grants the highest cutting quality at high speed by means of SK165 HPC High-Performance-Cutting technology torch, which combines the concentrated cutting beam to high power.

Smart Start Transfer and Smart End Cutting functions permit both initial and final cutting phases in the best way.

Category:


FEATURES

  • SK165 torch with HPC High Performance Cutting technology and coaxial cable
  • Digital display for the digital control of all parameters
  • Very high cutting power
  • More productivity thanks to high quality and cutting speed

 

PLASMA GOUGING

Plasma gouging represents a rapid, economic and easier method for removing metal as compared to traditional gouging by means of carbon electrodes. It reduces smoke emissions and noise; furthermore no specialized operators are required and gouging area can be clearly seen.

SMART START TRANSFER

Innovative electronic circuit during arc striking gives an optimal and gradual pilot arc switching to the cutting arc, by ensuring an immediate stability of the plasma beam for a longer life of the torch consumables.

SMART END CUTTING

At the end of the cutting process, the current gradually reduces to an optimal value, which favors part detachment in an efficient way. Besides minimizing noise at the end of cutting, this device also obviates the necessity of the operator having to manually separate the pieces, thereby avoiding any damage to cut surface ends.

Taglio al plasmaRegolazione elettronicaCompensazione tensione di rete ±X%Arco pilota
TECHNICAL DATA     SHARK 155
Input Voltage 50/60 Hz V 400-3ph
Input Power @ I2 max kVA 27,5
Delayed Fuse (I2 @ 100%) A 30
Power Factor / cos f   0,89/0,99
Efficency Degree 86
Current range A 25 ÷ 150
Duty Cycle (40°C)   100% A 100
60% A 120
30% A 150
Motorgenerator requirement for full capacity kVA 50
Cutting Capacity Recommended mm 45
Maximum mm 50
Severange mm 60
Piercing mm 25
Gas supply   Air / N2
Gas Pressure bar 5,0 ÷ 6,0
Gas Flow l/min 360 ÷ 410
Protection Class  IP 23 S 
Dimensions   mm 515
 mm 290
 mm 730
Weight kg 48

Additional information

Settore

, , , , , , ,

Processo

,

Alimentazione

Materiale

, , , , ,

Caratteristiche speciali

Spessore consigliato

Spessore di separazione

You may also like…