SK 165

SK165 torches for manual cutting are characterized by High Performance Cutting HPC technology which permits an increase in air quantity and speed, to better concentrate the plasma cutting beam and to stabilize the cutting arc.

To receive more information about CEA products
please fill out the form
  • CEA Welding is committed to protecting and respecting users’ privacy: the personal information collected is only used to administer the accounts and provide the requested products and services. Users may be contacts with suggestions on products, services or other content that we believe could be interesting for them. If you want to be contacted for this purpose, select one of the following contact modes:
  • In order to give you the requested content, we need to store and use your personal data. If you allow us to do this, please select the checkbox below.
  • You can unsubscribe at any moment. For further information about the execution of this procedure, consult our privacy policy and other recommendation regarding the protection and respect of privacy; read our Privacy policy.

MANUAL PLASMA CUTTING TORCH 160 A

  • high cutting speed
  • optimal quality and cleanliness of the cut surfaces
  • high concentration of the plasma cutting beam
  • lack of dross
  • reduction in the heat affected zone
  • longer life of the consumables
  • piercing on lamination achieved in shorter times
  • All SK torches are fitted with a coaxial cable which combines great flexibility to robustness and resistance to crushing.

HIGH PERFORMANCE CUTTING – HPC

HPC – High Performance Cutting technology permits the generation of radial and swirling gas flows to the cutting arc axis, thus creating a plasma beam at a very high temperature that melts and vaporizes the surface being cut in a  more efficient way.
This technology also avoids the phenomenon of the double arc – formation of two arcs in series between the cathode and the workpiece surface – the main reason for damage to the nozzle and arc instability – by ensuring the highest quality and the best cutting performance together with a longer life of the consumables.

Main advantages are:

High Performance Cutting technology is the very best choice for plasma torches with nominal cutting currents above 60 A.
New High Performance Cutting SK torches increase the density of the plasma cutting beam and reduce the width of the arc cut area, by producing a narrower and less inclined cut. This is achieved by easily removing the molten
material with a consequent improvement of the cutting quality, which shows neat cuts, lack of dross, minimal heat-affected zone and sufficiently squared edges.

  • Better cutting quality
  • High cutting speeds
  • Narrower cuts
  • Longer life of the consumables
POS. CODE DESCRIPTION BLISTER QTY.  
1 422678 Torch body 1  
2 433609 O-ring 20  
3 425024 Electrode 5 •
4 482137 Swirl ring 2 •
5 408640 Nozzle 45 A 10  
6 408641 Nozzle 65 A 10  
7 408642 Nozzle 85 A 10  
8 408643 Nozzle 105 A 10  
9 408644 Nozzle 125 A 10  
10 408645 Nozzle 160 A 10 •
11 408632 Nozzle for gouging 105-125 A 10  
12 408633 Nozzle for gouging 160 A 10  
13 486021 External nozzle 45-85 A 1  
14 486022 External nozzle 105-160 A 1 •
15 487633 Shield cap 45-85 A (manual cut) 2  
16 487634 Shield cap 105-160 A (manual cut) 2 •
17 487641 Shield cap (gouging) 2  

• Assembled on SK165 torch when supplied with the equipment

You may also like…