DIGITECH VP2 COMPACT

vision.ARC2 enables to weld with the following optional special processes:

MIG MAG

vision.COLD – vision.ULTRASPEED – vision.POWER – vision.PIPE

MIG PULSED

vision.PULSE-POWER – vision.PULSE-RUN -vision.PULSE-UP

E.C.P.

EXTRA CURVE PACKAGE

vision.ARC 2 allows the power source control to operate in a more precise and faster way, thus granting an absolute constant arc and a perfect detachment of the droplet, mostly in MIG PULSED and DUAL PULSED.

vision.ARC2 also enables the use of the CEA special vision.Pulsed processes. Main advantages:

• improved arc stability
• optimization of the impulse characteristics
• quick and precise control of the short- circuits
• faster welding speed
• further reduced heat input

vision.PULSE allows a constantly controlled short arc pulse welding, by optimizing the results of traditional pulse welding.

This enables to reduce the high heat input, typical in pulse welding, with a consequent reduction in distortions, an improvement off the puddle and considerable increase in welding speed too.

Dual.PULSE favours a further reduction in the heat transfer to the workpiece by minimizing its deformation and it produces premium quality aesthetic beads similar to TIG finishing. Dual.PULSE is extremely useful when welding aluminium and stainless steel.

• PROFESSIONAL WIRE FEEDING mechanism with 4 rolls of large diameter for a precise and constant wire driving
• DOUBLE GROOVE ROLLS replaceable without any tool
• LODGING FOR WIRE SPOOLS up to Ø 300 mm
• LED LIGHT in the feeder compartment
• INSPECTION WINDOWS in the spool cover
• HK1 Hanging Kit
• GRADUATED KNOB to achieve the most correct value of the wire pressure cables from the power source to the feeder.
• STRONG INDUSTRIAL CASE made to last

DIGITECH VP3 control, fitted with the innovative colour display with icons and a clear infographic, allows even less expert welders to very easily adjust all the welding parameters in an intuitive way with extreme simplicity.

At the same time, DIGITECH VP3 power sources offer also most expert welders the possibility of fine tuning and customizing the welding process control, thanks to the ability to access clear, simple and complete under menus for the best possible configuration and optimization of the equipment.

WSC wire start control prevents any possible wire sticking to the workpiece or torch nozzle, by always ensuring a precise and “soft” arc striking.

All CEA DIGITECH VP3 are standard equipped with ETHERNET socket. This feature allows all users to interface the equipment to a remote device and support software.

CEA power sources are standard equipped with analogic-digital I/O. This allows to integrate very easily the power source into an automated welding equipment without any expensive and sophisticated external interfaces, usually necessarily supplied for robotics.

DIGITECH VP3 power sources can be connected to any Robot or Cobot by means of a CEA Robot Interface which can handle several analogic, fieldbus digital protocols depending on the features of the Robot to be used.

CQM (CEA QUALITY MANAGER) is a software developed by CEA to enable welding data recording, monitoring, and printing by means of an external computer connected to one or more DIGITECH power sources.

CWM (CEA WELDER MANAGER) is a software developed by CEA designed to monitor the status of one or more DIGITECH power sources by connecting them via Ethernet (or Wi-Fi optional) to an external computer in the same network.