Search for a product within the site

Find your best solution forArc welding

Input power

Special Features

Materials

Special Processes

Processes

Application fields

Find your best solution forPlasma cutting

Input power

Special Features

Materials

Processes

Application fields

Recommended thicknesses

Severance thicknesses

Contact us

To receive more information about CEA products please fill out the form

"*" indicates required fields

First name*

Last name*

Company name*

Job title

Email*

Phone number

City*

Country*

General area of interest*

Note*

Other data

CEA Welding is committed to protecting and respecting users’ privacy: the personal information collected is only used to administer the accounts and provide the requested products and services. Users may be contacts with suggestions on products, services or other content that we believe could be interesting for them. If you want to be contacted for this purpose, select one of the following contact modes:

I agree to receive further communication from CEA Welding.

Privacy*

In order to give you the requested content, we need to store and use your personal data. If you allow us to do this, please select the checkbox below.

I allow CEA Welding to store and process my personal data. *

CAPTCHA

You can unsubscribe at any moment. For further information about the execution of this procedure, consult our privacy policy and other recommendation regarding the protection and respect of privacy; read our Privacy policy.

MATRIX X AC/DC-R

Arc welding

MATRIX X AC/DC-R

THE ULTIMATE ROBOTIC SOLUTION FOR AC/DC TIG

AC/DC TIG INVERTER WELDING EQUIPMENT FOR ROBOTIC APPLICATION

MATRIX X AC/DC series three-phase power sources, in the special “R” version, can be easily integrated into TIG welding automated equipment by means of ROBOMAT 1 interface which handles both all the start/stop signals of the process and main welding parameter adjustments.

MATRIX X AC/DC-R

ROBOMAT01

ROBOMAT01 represents a flexible and efficient interface system that fully meets all Analogic/Digital connections.

Excellent welding performance

Their excellent characteristics, coupled with the high technology of the digital control, allow a perfect stability of the welding arc, granting high performance TIG welding in the more sophisticated industrial applications and maintenance.

Thanks to PFC the single phase MATRIX X 220 AC/DC optimises the amount of energy consumption by allowing the use of this powerful power source, without problems, with 16 A fuse mains and power generator
sets.

Other characteristics

TIG DC minimum current from 1A and TIG AC starting from 3A
Smart HF IGNITION to grant more accurate and prompter Arc Striking in all conditions
Reduced weight and size, easy-to-carry
Control rack protection cover
Compact water cooling equipment integrable with the power source (optional)
Simple automation: TSA1 TIG KIT (optional)

Technical features

X VISION CONTROL DISPLAY TIG

X Vision control display with “ONE CLICK KNOB” encoder for the pre-setting and monitoring of all the welding parameters:

User friendly interface
Digital Ammeter and Voltmeter with welding current pre-setting and Hold Function of the last read value
Welding mode “cycle”
Personalized welding program storing and recalling
Possibility of copying job/s easily from one machine to another via USB
Advance setting infographic

SIMPLE AUTOMATION

CEA power sources are standard equipped with analogic-digital I/O. This allows to integrate very easily the power source into an automated welding equipment without any expensive and sophisticated external interfaces, usually necessarily supplied for robotics.

coldTACK

Innovative spot welding device to achieve precise and safe joining with a minimal thermal input.

Multi-cold.TACK function grants cold spotting in a rapid sequence, thus further widening the benefits of the single spot.

Thanks to Perfect-Point function, cold.TACK allows to obtain the most precise spot positioning.

TIG RCT - Running coldTACK

RCT is the acronyms of Running cold.TACK; indeed, the TIG RCT process allows to benefit of all the cold.TACK advantages, by repeating the single cold.TACK point in a continuous way, in order to achieve a cold and perfect welding seam.

Using TIG RCT the welding seam is much colder in comparison to the one achievable with Pulse TIG and it represents the ideal solution to weld thin materials with a very low heat transfer. TIG RCT is a direct current process not available in AC welding.

CYCLE FUNCTION

“CYCLE” function allows to continuously switch between two current values, by previously preselected simply pressing the torch trigger. This function is most suitable for welding different thickness profiles, requiring a continuous current adjustment change.

PULSE MODE

SYN PULSE

SYN PULSE will synergically generate pulse frequency and base current

ULTRA FAST

Adjust frequency up to 2000 Hz

FAST PULSE

Adjust frequency from 0,5 Hz to 500 Hz

SLOW PULSE

Adjust separately current/time of peak and base

BALANCE PLUS

Possibility of independently adjust both current time (t) and its amplitude (A) while staying in either positive or negative polarity, by offering a perfect control of penetration and arc cleaning with a drastic reduction in lateral undercuts.

WAVE SHAPES SPECIAL TIG AC FUNCTIONS

DYNAMIC

Square wave: high arc dynamics for all applications

SOFT

Sinusoidal wave: smoother and softer arc with a reduced noise, ideal for medium thickness

SPEED

Mixed wave: optimal penetration at high welding speed and low consumption of the electrode

COLD

Triangular wave: low heat transfer with reduced deformation, ideal for small thickness

FREQUENCY CONTROL IN AC

Frequency adjustment of the various AC wave shapes for better directional control, reduction of the thermally altered area, deeper penetration and electrode lower wearing out.
High level frequency enables to weld very thin material with excellent results. Low frequency is ideal for medium thickness or whenever edge preparation is not accurate.

Available accessories

Discover all available accessories

Configurator

HRX 20

Water cooling equipment HRX 20 230 V

HRX 30

Water cooling equipment HRX 30 400 V

HRX 52

Water cooling equipment HRX 52 400 V

Cea CL-1100

Cea CL-1100 cooling liquid – 5 l Tank

Trolley VT 101

Trolley VT 101 with 2 rolls for power source, cooling equipment and cylinder

Trolley CT 401

Trolley CT 401 with 4 rolls for power source, cooling equipment and cylinder

Trolley CT 70

Trolley CT 70 with 4 rolls for power source, cooling equipment and cylinder (and autotransformer)

Trolley PRIME CT 80

Trolley CT 80 for power source, cylinder (and autotransformer)

35 mm² / 4 m Ground cable with clamp

50 mm² / 4 m Ground cable with clamp

70 mm² / 4 m Ground cable with clamp

A6 kit

A6 Connection kit for non-standard Torch

TSA1 - TIG Simple Automation KIT

TSA1 - TIG Simple Automation KIT - (Torch trigger - Arc On - Current Adj. 0-10V)

Gallery

MATRIX X AC/DC-R at work

Datasheet

MATRIX X AC/DC-R: Technical features

TECHNICAL DATA			MATRIX X220 AC/DC-R	MATRIX X300 AC/DC-R	MATRIX X400 AC/DC-R	MATRIX X500 AC/DC-R
Single-phase 50/60 Hz	V	20% -20%	230	–	–	–
Three-phase 50/60 Hz	V	20% -20%	–	400	400	400
Installed power @ I₂ Max	kVA		5,6	9,0	19,0	26,0
Delayed fuse (I₂ @ 60%)	A		16	10	32	32
Power factor / cos φ			0,99/0,99	0,93/0,99	0,65/0,99	0,73/0,99
Efficiency degree			0,81	0,83	0,86	0,87
Open circuit voltage	V		85	85	85	85
Current range	A		1-220	1-300	1-400	1-500
Duty cycle at (40°C)	A 100%		140	210	350	400
	A 60%		180	250	400	500
	A X%		220(30%)	300(35%)	–	–
Standards			EN 60974-1 – EN 60974-3 – EN 60974-10
Standards
Protection class	IP		23 S	23 S	23 S	23 S
Dimensions (WxLxH)	mm		530x215x410	530x215x410	710x290x530	710x290x530
Weight	kg		20	21,5	53	54