SHARK 125-M

HPC permits the generation of radial and swirling gas flows to the cutting arc axis, thus creating a plasma beam that melts and vaporizes the surface for cutting in a more efficient way. This technology also avoids the phenomenon of the double arc by ensuring the highest quality and the best cutting performance together with a longer life of the consumables.
High Performance Cutting SK torches increase the density of the plasma cutting beam and reduce the width of the arc cut area, by producing a narrower and less inclined cut.

Innovative function that allows, at the end of the cut, a gradual and synergic decline of the current up to an optimal value.

Compared to traditional end-of-cut methods, it has the following advantages:

• Improved end-of-cut quality with permanent separation of parts
• Cutting end noise reduction
• Prevents the operator from manually separating pieces by ruining the final part of the cutting surface

Innovative electronic circuit that allows an optimal and gradual transfer of the pilot-arc in the main arc, during the start of the cutting arc.

Compared to a traditional system of arc transfer, it has the following advantages:

• Guarantees immediate stability of the plasma flow
• Increases the cut start performance and also improves cutting quality
• Increases the life of the torch consumables

Thanks to this process, it is possible to obtain detailed cuts with air plasma by using the specific Clean-Cut consumables available for the SK/SKM torches. With this process it is possible to replace expensive technologies like laser and waterjet. Clean-Cut consumables produce a narrower cutting width with a more concentrated arc ideal for cutting thinner materials (up to 2mm and up to 45A).

MAIN ADVANTEGES:

• Cutting thin sheets with better quality and without burrs
• Cutting of sheets with minimum tolerances
• Cutting of complex shapes with many details

SKM torches are the result of years of CEA research to improve the performance of the plasma cutting, thus increasing its control and its thermal efficiency. The main advantages are:

• high cutting speed
• optimal quality and cleanliness of the cut surface
• high concentration of the plasma cutting beam
• lack of dross
• reduction in the heat affected zone
• longer life of the consumables
• piercing on lamination achieved in shorter times
• coaxial cable for a great flexibility and robustness

CS is CEA guarantee hallmark for CEA PLASMATECH consumables. All original consumables belonging to SK and SKM torches are CS marked to prove the origin. CS mark, present on all consumables, is the guarantee that all declared performances can be achieved thanks to CEA high quality production and experience. The use of CS consumables is strictly recommended for avoiding:

• Overheating and damage to the torch and power source
• Poor performance and worsening in cutting quality
• voiding of CEA warranty

The new CEA’s plasma capsules allow you to take control of your cut saving you time and reduce set up mistakes with this innovative consumable management. A single cartridge contains a shield cap, external nozzle, nozzle, swirl rig and electrode ready to be used as soon as they are plugged in. Thanks to the immediate colour differentiation it’s possible to never miss the right combination of consumable for your specific application automatic cutting, manual cutting or gouging. All CEA plasma capsules are compatible and interchangeable with our current SK/SKM torches without the need of any adaptor.