MATRIX HF-R

• Welding process selector: TIG DC, TIG DC “Lift”, MMA DC
• Pulse TIG welding adjustable from 0,5 up to 2000 Hz with available “EASY PULSE” features
• Pulsation mode: Synergic, Fast, Ultrafast, Slow
• 99 program

CEA power sources are standard equipped with analogic-digital I/O. This allows to integrate very easily the power source into an automated welding equipment without any expensive and sophisticated external interfaces, usually necessarily supplied for robotics.

Innovative spot welding device to achieve precise and safe joining with a minimal thermal input.

Multi-cold.TACK function grants cold spotting in a rapid sequence, thus further widening the benefits of the single spot.

Thanks to Perfect-Point function, cold.TACK allows to obtain the most precise spot positioning.

RCT is the acronyms of Running cold.TACK; indeed, the TIG RCT process allows to benefit of all the cold.TACK advantages, by repeating the single cold.TACK point in a continuous way, in order to achieve a cold and perfect welding seam.

Using TIG RCT the welding seam is much colder in comparison to the one achievable with Pulse TIG and it represents the ideal solution to weld thin materials with a very low heat transfer. TIG RCT is a direct current process not available in AC welding.

SYN PULSE

SYN PULSE will synergically generate pulse frequency and base current

ULTRA FAST

Adjust frequency up to 2000 Hz

FAST PULSE

Adjust frequency from 0,5 Hz to 500 Hz

SLOW PULSE

Adjust separately current/time of peak and base

“CYCLE” function allows to continuously switch between two current values, by previously preselected simply pressing the torch trigger. This function is most suitable for welding different thickness profiles, requiring a continuous current adjustment change.