DIGITECH R

ARC WELDING

CEA has developed several products and interfaces for automation and robotics for MIG/MAG by using its power sources. A team of experts is always able to suggest and propose the solutions better suiting different applications in line with the customer’s needs.

DIGITECH VISION PULSE equipment allow a flexible and economic integration with all major welding robots available on the market; thanks to the availability of the feeders and versatile interfaces – digital and analogig/digital – these power sources can be either connected to new robotized equipment or utilized as retrofit to existing robots.

Category:
To receive more information about CEA products
please fill out the form
  • CEA Welding is committed to protecting and respecting users’ privacy: the personal information collected is only used to administer the accounts and provide the requested products and services. Users may be contacts with suggestions on products, services or other content that we believe could be interesting for them. If you want to be contacted for this purpose, select one of the following contact modes:
  • In order to give you the requested content, we need to store and use your personal data. If you allow us to do this, please select the checkbox below.
  • You can unsubscribe at any moment. For further information about the execution of this procedure, consult our privacy policy and other recommendation regarding the protection and respect of privacy; read our Privacy policy.

WELDING MIG POWER SOURCE FOR ROBOTICS

RBS 15

Wire feeder to be fitted on both hollow wrist robots and traditional ones with external device.Compact and light (only 6.7 kg) RBS 15 represents the ideal solution for any robotized application,being equipped with a 4 roll feeding mechanism, easily accessible also for roll replacements withoutany tooling, and having a double solenoid valve for gas and air.

MCB 2

Control box for the wire feeder and auxiliary functions purpose-designed to be fitted either inside the power source, or inside the external robot control or even on the robot structure depending on the integrator’s needs.

RI-A 1: Analogic/Digital interface. Usable with robots with analogic/digital control

RI-D 2: DeviceNet interface. Usable on robots with field bus controller.

The specific use of Special welding processes (optional) is an ideal choice for automation and allows to optimize specific welding application, by granting far better performances in terms of quality and welding speed.

  • vision.PIPE for more accurate welding in pipe first root pass
  • vision.COLD for low heat transfer MIG/MAG welding
  • vision.ULTRASPEED to weld small and medium thickness at a far higher speed
  • vision.POWER to obtain deeper penetration on medium and large thickness material
TECHNICAL DATA   DIGITECH 4000-VP2 DIGITECH 5000-VP2
Three phase input 50/60 Hz V +20%
-20%
400 400
Input Power @ I2 Max kVA 25,5 32,0
Delayed Fuse (I2 @ 60%) A 32 40
Power Factor / cos φ   0,65/0,99 0,65/0,99
Efficiency Degree   0,85 0,85
Open circuit voltage V 70 70
Current range A 10-400  10-500
   A 100% 350 380
Duty cycle at (40°C)  A  60% 400  460
    A X%  500 (50%)
Wires Ømm 0,6-1,6 0,6-1,6
Standards   EN 60974-1 •  EN 60974-10 
Protection Class IP 23 S  23 S
Insulation Class   H H
Dimenions      mm 660 660
 mm 290 290
 mm 515 515
Weight kg 40 44

Additional information

Settore

, , , , , , , , ,

Processo

, ,

Alimentazione

Materiale

, , , , ,

Processi Speciali

, , , , , , ,

Caratteristiche speciali

, , , , , ,

You may also like…