Powerful, robust and compact, SHARK 105 absolutely grants high productivity in the toughest cutting operations without any compromise: cuts are always precise and ensure the highest cutting results in all applications.

Top cutting quality at high speed by means of SK 125 HPC High-Performance-Cutting technology torch, granting a powerful and concentrated cutting beam. Smart Start Transfer and Smart End Cutting functions permit both initial and final cutting phases in the best way.

To receive more information about CEA products
please fill out the form
  • CEA Welding is committed to protecting and respecting users’ privacy: the personal information collected is only used to administer the accounts and provide the requested products and services. Users may be contacts with suggestions on products, services or other content that we believe could be interesting for them. If you want to be contacted for this purpose, select one of the following contact modes:
  • In order to give you the requested content, we need to store and use your personal data. If you allow us to do this, please select the checkbox below.
  • You can unsubscribe at any moment. For further information about the execution of this procedure, consult our privacy policy and other recommendation regarding the protection and respect of privacy; read our Privacy policy.



  • SK 125 torch with HPC High Performance Cutting technology and coaxial cable
  • Powerful, compact and light, only 23.9 Kg
  • More productivity thanks to high quality and cutting speed
  • Reduced operating costs granted by longer life of the consumable parts


Plasma gouging represents a rapid, economic and easier method for removing metal as compared to traditional gouging by means of carbon electrodes. It reduces smoke emissions and noise; furthermore no specialized operators are required and gouging area can be clearly seen.


Innovative electronic circuit during arc striking gives an optimal and gradual pilot arc switching to the cutting arc, by ensuring an immediate stability of the plasma beam for a longer life of the torch consumables.


At the end of the cutting process, the current gradually reduces to an optimal value, which favors part detachment in an efficient way. Besides minimizing noise at the end of cutting, this device also obviates the necessity of the operator having to manually separate the pieces, thereby avoiding any damage to cut surface ends.

Taglio al plasmaRegolazione elettronicaCompensazione tensione di rete ±X%Arco pilota
Input Voltage 50/60 Hz V 400-3ph
Input Power @ I2 max kVA 15
Delayed Fuse (I2 @ 100%) A 16
Power Factor / cos f   0,90/0,99
Efficency Degree 85
Current range A 20 ÷ 100
Duty Cycle (40°C)   100% A 70
60% A 90
40% A 100
Motorgenerator requirement for full capacity kVA 30
Cutting Capacity Recommended mm 30
Maximum mm 35
Severange mm 40
Piercing mm 20
Gas supply   Air / N2
Gas Pressure bar 5,0 ÷ 6,0
Gas Flow l/min 280 ÷ 330
Protection Class  IP 23 S 
Dimensions   mm 390
 mm 185
 mm 595
Weight kg 24

Additional information


, , , , , , , ,





, , , , ,

Spessore consigliato

Spessore di separazione

You may also like…