Skip to content
22 January 2019

TIG Welding: things to know for good work

As those who work in the field know, TIG is part of arc welding and uses a non-consumable tungsten electrode that works together with the inert gas (usually argon). The acronym that gives this process its name indicates this description:

  • Tungsten
  • Inert
  • Gas

TIG welding can be done with or without the use of filler metal; in the first case, “TIG rods” are used.

This process is frequently used as it enables welding sheet metal of lower thickness without creating a deformation from the excessive heat.

TIG welding can be used with spot or seam welding, which is why it is used when pipes need to be welded, as well as in sectors such as furniture manufacturing, marine and automotive.


TIG welding process must be done in closed environments

The welding process

One of the enemies of TIG welding is a rush of air, which can strike the torch while working. The problem is not due to the fact that a gust of wind can lower the temperature, but the oxygen, which must not come into contact with the weld pool.

The welding process, as previously stated, takes place in an inert atmosphere thanks to argon gas, which is heavier than air. This is to ensure that the weld pool is not attacked by oxidation, which could prevent the filler material advancing and depositing correctly, and give rise to an imperfect weld.

The inert gas must be pure and free of moisture, so as to ensure the protection against oxygen necessary for creating a correct TIG weld.

TIG welding processes can be:

  • manual: with the arc length and the electrode controlled by the welder;
  • semiautomatic: arc length and electrode controlled by the machine, while the welder’s job is to move the electrode along the weld;
  • automatic: all operations are done by a robot.


Continuous welding: pay attention to distance and uniformity

The advantages of TIG welding

The heat required for melting, in TIG welding, is generated by the electric arc that forms between the torch’s electrode and the material where the joint needs to be made.

If filler material is not used, it’s the high temperature alone that enables making the joint, and so to proceed with a continuous weld, we need to pay a lot of attention to the distance between the electrode and the surface to weld.

The distance, just a few millimetres, must be kept constant, without ever letting the electrode touch the piece, or it will stick to it, creating an interruption at that point.

When using sticks, we must make sure to proceed consistently, keeping the filler material in the arc so it melts evenly and is protected by the gas.

A continuous weld with a homogeneous deposit of material will be very strong and aesthetically better, whereas if the bead is uneven, the result will certainly not be very commendable, be it from a technical or aesthetic viewpoint.


The advantages of TIG welding

This type enables achieving strong welds, especially with thinner components, while it’s not very suitable with thicker components.

The main advantages of TIG welding can be attributed to:

  • quality of the weld: the elimination of flux and arc without sprays ensure tidy, accurate welds without the inclusion of slag and without reworking.
  • possibility of using this process in any welding position; indeed, the handling versatility of the arc enables working in comfort
  • possibility of welding nearly all types of material, ferrous and even non-ferrous
  • does not produce slag


Latest news
Stay tuned with the last news from CEA. Here you can find the most relevant news and products that we are presenting.
All news