SYNERGIC MULTIPROCESS INVERTER
vision.ARC2 is the latest evolution of the software for the arc control, developed by CEA to achieve a more perfect and stable arc, together with a superior correction in the control of the welding pulse impulse. New vision.ARC2 allows the power source control to operate in a very precise and faster way, thus granting an absolute constant arc and a perfect detachment of the droplet, mostly in MIG PULSED and DUAL PULSED
vision.PULSE permits a short arc pulse welding, constantly controlled, by optimizing the results of traditional pulse welding. This enables to reduce the high heat input, typical in pulse welding, with a consequent reduction in distortions, an improvement in the puddle and considerable increase in welding speed too.
favours a further reduction in the heat transfer to the workpiece by minimizing its deformation and produces premium quality aesthetic beads similar to TIG finishing.
Dual Pulse is extremely useful mostly when welding aluminium and stainless steel.
SPECIAL PROCESSES (OPTIONAL)
vision.ARC2 , available on DIGITECH VP2, is the software platform which enables to weld by means of the following special processes, i.e.:
- vision.PIPE for more accurate welding in pipe first root pass
- vision.COLD for low heat transfer MIG/MAG welding
- vision.ULTRASPEED to weld small and medium thickness at a far higher speed
- vision.POWER to obtain deeper penetration on medium and large thickness material
- vision.PULSE-UP dedicated to vertical up welding
- vision.PULSE-POWER for a greater penetration together with an increase in welding speed
- vision.PULSE-RUN for a faster pulse welding
Standard equipped with analogic-digital I/O, DIGITECH VP2 can be easily integrated into automated welding equipment without any expensive and sophisticated external interfaces usually necessarily supplied for robotics.
DIGITECH VP2 power sources can be easily connected to any Robot by means of a CEA Robot Interface which can handle several analogic, fieldbus digital protocols depending on the features of the Robot to be used.
OPEN TO THE FUTURE
DIGITECH VP2 equipment are systems open to evolving technology: both control firmware and software are designed to be always updatable.
Upon request, DIGITECH VP2 equipment can be supplied fitted with an Ethernet socket for connection to any network.