DIGITECH VP 2

ARC WELDING

SYNERGIC MULTIPROCESS INVERTER PULSED POWER SOURCES

Synergic multiprocess pulsed equipment of DIGITECH VP2 (VISION PULSE 2) series are the evolution of DIGITECH VISION PULSE.
The use of a very latest generation microprocessor and of a new arc control software vision.ARC2 allow to obtain an incredibly far superior premium quality welding performance unthinkable till this day.
DIGITECH VP2 equipment are characterized by a synergic digital control to automatically determine the best welding parameters, based on the used type of material, wire diameter and gas.
DIGITECH VP2 innovative digital control with colour display fully meets the needs of combining synergy with the total control of all the welding parameters, for a far more modern and effective approach to welding.
Technologically ahead, robust and easy-to-use, they offer premium welding quality at high speed, in PULSED MIG, DUAL PULSED, MIG-MAG, MMA and TIG with “lift” arc striking and represent the best solution in any industrial field requiring high precision and repeatability of the achieved results.
DIGITECH 3300, 4000 e 5000 VP2 are supplied with a separate wire feeder.

To receive more information about CEA products
please fill out the form
  • CEA Welding is committed to protecting and respecting users’ privacy: the personal information collected is only used to administer the accounts and provide the requested products and services. Users may be contacts with suggestions on products, services or other content that we believe could be interesting for them. If you want to be contacted for this purpose, select one of the following contact modes:
  • In order to give you the requested content, we need to store and use your personal data. If you allow us to do this, please select the checkbox below.
  • You can unsubscribe at any moment. For further information about the execution of this procedure, consult our privacy policy and other recommendation regarding the protection and respect of privacy; read our Privacy policy.

SYNERGIC INVERTER PULSED SEPARATED

vision.ARC2 is the latest evolution of the software for the arc control, developed by CEA to achieve a more perfect and stable arc, together with a superior correction in the control of the welding pulse impulse. New vision.ARC2 allows the power source control to operate in a very precise and faster way, thus granting an absolute constant arc and a perfect detachment of the droplet, mostly in MIG PULSED and DUAL PULSED

vision.PULSE permits a short arc pulse welding, constantly controlled, by optimizing the results of traditional pulse welding. This enables to reduce the high heat input, typical in pulse welding, with a consequent reduction in distortions, an improvement in the puddle and considerable increase in welding speed too.

DUAL PULSE

favours a further reduction in the heat transfer to the workpiece by minimizing its deformation and produces premium quality aesthetic beads similar to TIG finishing.
Dual Pulse is extremely useful mostly when welding aluminium and stainless steel.

SPECIAL PROCESSES (OPTIONAL)

vision.ARC2 , available on DIGITECH VP2, is the software platform which enables to weld by means of the following special processes, i.e.:

SIMPLE AUTOMATION

Standard equipped with analogic-digital I/O, DIGITECH VP2 can be easily integrated into automated welding equipment without any expensive and sophisticated external interfaces usually necessarily supplied for robotics.

ROBOT INTERFACE

DIGITECH VP2 power sources can be easily connected to any Robot by means of a CEA Robot Interface which can handle several analogic, fieldbus digital protocols depending on the features of the Robot to be used.

OPEN TO THE FUTURE

DIGITECH VP2 equipment are systems open to evolving technology: both control firmware and software are designed to be always updatable.

ETHERNET LAN

Upon request, DIGITECH VP2 equipment can be supplied fitted with an Ethernet socket for connection to any network.

Saldatura MIGSaldatura MIG ad arco pulsatoSaldatura TIGControllo digitaleRegolazione sinergicaProgrammabileCompensazione tensione di rete ±20%Strumenti misura A/VInnesco Lift ArcPredisposizione comando a distanza

CT 70 trolley

CT 75 trolley

WK1 kit of standard wheels

WK2 kit of extra large wheels

Adjustable torch support

RC 178 remote control

Autotransformer

Up/Down torches

HR 30/31 water cooling equipment

TECHNICAL DATA     DIGITECH VP2
3300 4000 5000
Three phase input 50/60 Hz V +20% 400
-20%
Input Power @ I2 Max kVA 19,6 25,5 31,2
Delayed Fuse (l eff) A 25 32 40
Power Factor / cos φ   0,65/0,99 0,65/0,99 0,69/0,99
Efficiency Degree   0,82 0,86 0,87
Open circuit voltage V 62 70 70
Current range A 10-330 10-400 10-500
Duty cycle at (40°C) A 100% 280 350 380
A 60%; 300 400 460
A % 330(40%) 500(50%)
Wires Ø mm 0,6-1,6 0,6 – 1,6 0,6 – 1,6
Standards   EN 60974-1 • EN 60974-10
 
Protection Class IP 23S
Insulation Class   H
Dimensions  mm 660
 mm 290
 mm 515
Weight kg 35 40 44

Additional information

Settore

, , , , , , , , , , , ,

Processo

, , , ,

Alimentazione

Materiale

, , , , ,

Processi Speciali

, , , , , , ,

Caratteristiche speciali

, , , , , ,

You may also like…